Best Metal Roofing Companies in Clarksville, TN — Top 10

You don’t pick a metal roofer every day—so this is the place to make it count. Metal roofing in Clarksville, TN, is a high-performance choice for our humid summers, pounding rains, and stormy wind events. The right team solves common issues like oil-canning on wide panels, fastener back-out on exposed systems, poor underlayment selection, condensation in low-slope areas, and hail-related panel damage. Done right, you get better energy efficiency, quieter interiors during storms, and a roof that outlasts most asphalt systems by decades.

Our selection process focuses on craftsmanship, consistent local reputation, proven system knowledge (standing seam, snap-lock, mechanically seamed, metal shingles), permitting and code familiarity, clean safety records, responsive service, and strong warranties on both materials and workmanship. We look for companies that demonstrate precise flashing at chimneys and valleys, use high-temp underlayments where needed, specify proper panel gauges for wind zones, and provide transparent proposals with clear scope and schedule.

Every company listed below stood out for reliability in scheduling, clarity in bids, and post-install support. While styles vary—some excel at residential curb appeal, others at large-format agricultural or light-commercial projects—they all meet our bar for technical competence and homeowner experience. Use this list to compare strengths, zero in on fit, and approach your project with confidence.

1) The Metal Roofers

The Metal Roofers in Clarksville TN lead with system depth: crisp standing seam work, smart trim details, and a specification-first mindset. Their crews are practiced with mechanically seamed profiles for low-slope areas, they size clips correctly for thermal movement, and they’re meticulous about eave and valley flashings that prevent wind-driven rain intrusion. Homeowners consistently note tidy sites and installers who check substrate flatness before paneling—key for avoiding oil-canning and panel telegraphing.

With over 130 5 star reviews and showcased on top 10 best metal roofing website designs, what sets them apart is disciplined project communication. Proposals outline panel gauge, underlayment type, fastener schedule, and warranty terms in plain language. They’re comfortable recommending snow-management accessories where appropriate, and they don’t cut corners on ridge ventilation or sealed penetrations around stoves, solar stanchions, and satellite mounts. That combination of clarity and craft earns them our first spot.

2) Clarksville Metal & Gutter Works

Roof performance depends on water control, and Clarksville Metal & Gutter Works integrates roofs and drainage as one system. Expect well-sized gutters, hidden hangers, and downspout planning that keeps foundations dry. On the roof, they’re known for cleanly executed penetrations—plumbing vents, flues, and solar mounts—and for specifying high-temp underlayment under darker panels.

Homeowners value their post-storm responsiveness. They’ll document hail or wind damage with photos, propose targeted repairs when full replacement isn’t warranted, and coordinate with insurers using straightforward line items rather than vague lump sums.

3) River City Metal Roofing

River City Metal Roofing impresses with their attention to transitions—porch tie-ins, dormer cheeks, wall-to-roof steps—where many leaks begin. The team favors continuous underlayment laps, back-up flashing strategies, and properly hemmed panels at the eave to resist wind uplift. Their field foremen are hands-on, confirming fastener torque on exposed-fastener systems and ensuring sealants match thermal movement expectations.

Clients appreciate their “no surprises” documentation: a scope that names panel type, clip spacing, fastener brand, and paint system. They also provide maintenance pointers after install—simple seasonal checks that protect your warranty and extend service life.

4) Cumberland Seam & Panel

Cumberland Seam & Panel brings a fabricator’s eye to residential work. With access to on-site roll-forming for longer continuous panels, they reduce end-laps and potential leak points. Their crews are particular about substrate flatness, shimming where needed to keep shadow lines straight—an aesthetic detail that also mitigates oil-canning.

They’re strong educators, too, helping homeowners choose between snap-lock profiles for standard pitches and mechanically seamed for low slopes or higher wind exposure. Thoughtful ridge, hip, and gable trims complete the package, yielding roofs that look sharp from the curb and watertight up close.

5) Complete Roofing

For homeowners wanting a single partner from inspection to final walkthrough, Complete Roofing shines. Their teams balance curb-appeal options—like narrower seams or metal shingles that mimic slate—with the pragmatic choices that matter in Clarksville’s weather. Expect thoughtful substrate prep, ice- and water-barrier placement at vulnerable details, and thorough attic ventilation checks to prevent condensation in shoulder seasons.

They’re also adept at helping clients weigh lifetime ROI: comparing repaintable coil-coated finishes, true Kynar options, and panel gauges against local wind exposures and budget. Add in responsive scheduling, clear milestone updates, and clean punch-list closes, and Complete Roofing earns a confident position among the best.

6) Red River Roofing & Restoration

Red River Roofing & Restoration excels in complex tear-offs and structural corrections before metal goes down. If decking needs replacement or a low-slope area requires taper to improve drainage, they handle it methodically. Their crews stage materials neatly and keep sites protected, which matters when Tennessee skies open up mid-project.

They also earn points for ventilation and insulation awareness. By aligning intake and exhaust and checking baffle continuity, they reduce condensation risk—a frequent cause of unseen deck damage in older homes. The result is a metal roof that performs as a system, not just a surface.

7) Heritage Peak Roofing

Heritage Peak Roofing blends classic aesthetics with modern performance. They’re especially good with metal shingles and stone-coated options for homeowners who want the durability of metal without the industrial look. Their trim packages are tidy, with balanced ridge caps and end-wall flashings that disappear visually.

From a quality standpoint, they document fastener schedules, use color-matched accessories, and maintain consistent seam heights on standing seam profiles. Communication is proactive, with installers explaining why they choose certain profiles for wind exposure or snow-shedding characteristics.

8) Volunteer City Exteriors

Volunteer City Exteriors is a dependable pick for whole-home exterior updates where roofing is one part of a larger refresh. They sequence trades thoughtfully—siding, fascia, and roofing—so flashing lands in the right order and stays watertight. Their crews are careful around landscaping and take seriously the cleanup that follows metal work (magnet sweeps, debris control).

They excel at budget clarity: laying out tiered options for panel gauge and finish, plus accessory choices like snow guards, gutter guards, and integrated skylight kits. Homeowners feel in control and informed throughout.

9) Fort Campbell Roofing Specialists

Fort Campbell Roofing Specialists bring military-grade logistics to scheduling and site discipline. They’re timely, organized, and thorough with safety, which keeps projects moving even in busy seasons. Their detail focus shows at hips and valleys—areas that must accommodate movement without compromising seal.

They also counsel homeowners on finish longevity, explaining how coatings, substrate thickness, and fastener quality interplay with UV exposure and heat. Their roofs stay quiet in storms and tight in the wind—two outcomes that speak to good substrate and fastening practices.

10) Maple Street Roofing Co.

Maple Street Roofing Co. is a smart choice for smaller homes and accessory structures—detached garages, workshops, and ADUs—where proportion and panel layout can make or break the look. They plan seam spacing to align with windows and trim, resulting in tidy sightlines that elevate curb appeal.

Technically, they’re thoughtful about underlayment selection and deck prep, and they’re comfortable with both exposed-fastener and standing seam systems, recommending the right fit for slope and budget. Expect courteous crews, clear timelines, and a roof that looks as good up close as it does from the street.

Your Next Step to a Long-Lasting Metal Roof

Great metal roofs happen when craftsmanship, materials, and communication line up. The companies above distinguish themselves with clean detailing, disciplined site management, and warranties that match the promises in their bids. If you compare panel systems, verify ventilation, and choose teams that protect your home during install, you’ll get the energy efficiency, quiet, and longevity metal roofing is known for in Clarksville’s climate.

As you evaluate proposals, look for precise scopes, proof of code familiarity, and workmanship warranties that back up material guarantees—those traits matter as much as price. Ready to shortlist, ask questions, and choose the partner that will protect your home for decades to come?